Outdoor powder coating polyester resin
TGIC curing polyester resin
Main features:
At present, the main weather-resistant powder system has good weather resistance and mechanical properties. It is not easy to yellow during the baking process. The layer is smooth and dense, without pinholes and other disadvantages. The powder variety is complete and can be configured with various colors and patterns.
Model | Acid value mgKOH/g | ICI viscosity(175℃)Po | Tg (℃) | Curing condition(℃/min) | Florida exposure test light retention rate (2 years) | Characteristic |
PT8000 | 27-32 | 130-180 | appr.63 | 200/10 | Used in the production of weather-resistant sand grain powder | |
PT8050 | 48-55 | 180-220 | appr.65 | 200/10 | High cross-linking density, good surface hardness, can be used alone or configured with dry blending low-gloss powder | |
PT8333 | 32-38 | 110-150 | appr.64 | 200/10 | Can be sprayed with a friction gun for better electrification | |
PT8335-1 | 32-38 | 90-120 | appr.63 | 200/10 | Excellent leveling, can be sprayed with friction gun | |
PT8335-2 | 32-38 | 110-150 | appr.64 | 200/10 | 58% | Good overall performance |
PT8335-3 | 31-37 | 180-220 | appr.63 | 200/10 | Excellent mechanical properties | |
PT8335 | 32-38 | 110-150 | appr.64 | 200/10 | Good overall performance, can be sprayed with friction gun | |
PT8336 | 32-38 | 90-120 | appr.63 | 200/10 | 58% | Excellent leveling |
Model | Acid value mgKOH/g | ICI viscosity(175℃)Po | Tg (℃) | Curing condition(℃/min) | Florida exposure test light retention rate (2 years) | Characteristic |
PH8337 | 28-34 | 120-160 | appr.64 | 180/15 | 58% | Good overall performance |
PH8720-1 | 20-25 | 140-180 | appr.57 | 180/15 | Low HAA dosage, can be used alone or formulated as a dry blend low-gloss powder | |
PH8720 | 20-25 | 130-180 | appr.57 | 180/15 | 59% | Low HAA dosage, formulating dry-mix low-gloss powder |
PH8250 | 30-55 | 30-55 | appr.56 | 180/15 | Low temperature curing, good leveling |
Indoor powder coating polyester resin
Epoxy cured polyester resin: 50:50 hybrid type
Resin model | Epoxy equivalent(g/ep) | Hydrolyzable chlorine 5% (percentage content) | Softening point(℃) | Viscosity (Gas, 25℃) | Volatile(%) | Color (Gardner Method) |
CEM-801X75 | 450-500 | ≤0.10 | / | Z3-Z5 | 74-76 | ≤1 |
Low viscosity standard resin, suitable for coating, civil engineering, bonding, electrical, etc. |
Epoxy cured polyester resin: 60:40 hybrid type
Model | Acid value mgKOH/g | ICI viscosity(175℃)Po | Tg (℃) | Curing condition(℃/min) | Characteristic |
PE6455 | 50-56 | 50-80 | appr.53 | 180/15 | Highly decorative, good yellowing resistance |
PE6455-1 | 50-56 | 50-80 | appr.53 | 180/15 | Excellent leveling, can be sprayed with friction gun |
PE6440 | 50-55 | 75-105 | appr.55 | 180/15 | High cost performance, good mechanical performance |
PE6440X | 50-55 | 80-110 | appr.56 | 180/15 | Faint easily |
PE6490 | 50-56 | 90-120 | appr.57 | 100/10 | Fast curing |
Epoxy cured polyester resin: 70:30 hybrid type
Model | Acid value mgKOH/g | ICI viscosity(175℃)Po | Tg (℃) | Curing condition(℃/min) | Characteristic |
PE7330 | 28-34 | 110-140 | appr.52 | 180/15 | Low acid value |